Type of bit

• BOTTOM CLEANING (3)
• Ball Nose (14)
• Corn (5)
• Down Cut (4)
• Engraving (6)
• Flat end mill (28)
• For Aluminium (5)
• Round Nose (5)
• Straight (4)
• Tapered Ball Nose (5)
• V Groove Bit (11)

CED (cutting edge diameter)

• (no filter) 

  0.5mm (4) 0.8 mm (1) 1.0 mm (11) 1.2 mm (1) 1.4 mm (1) 1.5 mm (9) 1.6 mm (1) 1.8 mm (1) 2.0 mm (18) 2.2 mm (1) 2.4 mm (1) 2.5 mm (6) 3.0 mm (5) 3.175 mm, 1/8" (18) 4.0 mm (15) 5.0 mm (2) 6.0 mm (11) 7.0 mm (1) 8.0 mm (4) 9 mm (1) 10.0 mm (1) 14 mm (1) 15 mm (1) 16 mm (2) 18 mm (5) 20.0 mm (4) 22 mm (9) 25 mm (5) 30 mm (4) 32 mm (12)

Number of flutes

• 1 Flute (13)
• 2 Flute (28)
• 3 Flute (5)
• 4 Fluet (2)

Shank Diameter

• 3.175 mm, 1/8" (34)
• 4.0 mm (9)
• 6.0 mm (23)
• 8.0 mm (8)

Radius

• 0.5mm (5)
• 0.25mm (4)
• 0.75mm (4)
• 1,5mm (2)
• 1.0mm (5)
• 2.0mm (2)

CEL

• (no filter) 

  4.0 mm (3) 6.0 mm (4) 7 mm (1) 8.0 mm (4) 10.5 mm (1) 11 mm (1) 12 mm (22) 13 mm (3) 15 mm (12) 16 mm (1) 17 mm (21) 20 mm (5) 20.5 mm (1) 22mm (28) 25 mm (16) 28 mm (13) 30,5 mm (1) 32 mm (13) 42 mm (10) 52 mm (7) 62 mm (1)

Collet type

• Adapter (3)

Adapter Collet

• 6.0 mm to 3.175mm (1)
• 6.0 mm to 4.0mm (1)
• 6.35mm (1/4") to 3.175mm (1/8") (1)
• 6.35mm (1/4") to 4.0mm (1)
• 4pcs. SET OD 6mm/6.35mm to ID 3.175mm/4mm (1)

Coating

• Titanium (6)

Angle

• 10 degree (3)
• 15 degree (3)
• 20 degree (5)
• 25 degree (1)
• 30 degree (5)
• 40 degree (4)
• 45 degree (5)
• 60 degree (7)
• 90 degree (8)
• 120 degree (2)
• 150 degree (1)

Tip

• 0,1 mm (5)
• 0,2 mm (1)

Material

• For aluminum (1)