Type of bit

•  Ball Nose (10)
•  Chamfer/Spot Drill Bit (2)
•  Corn (8)
•  End Mill (42)
•  Engraving (1)
•  fillet chamfer facet bevel (14)
•  For acrylic, PVC (16)
•  For Aluminium (9)
•  For Fiberglass (1)
•  For PCB (printed circuit board) (1)
•  For steel (7)
•  For Wood , MDF (41)
•  Left Hand Downcut (4)
•  Straight (8)
•  Table bottom cleaning (4)
•  Universal (23)
•  UP & Down Cut (5)
•  V Groove Bit (7)

Number of flutes

•  1 Flute (21)
•  2 Flute (24)
•  3 Flute (9)
•  4 Fluet (4)

CED (cutting edge diameter)

•  0,8 mm (1)
•  0.5 mm (5)
•  0.8 mm (2)
•  1.0 mm (27)
•  1.2 mm (4)
•  1.4 mm (4)
•  1.5 mm (27)
•  1.6 mm (3)
•  1.8 mm (3)
•  2.0 mm (39)
•  2.1 mm (1)
•  2.2 mm (2)
•  2.3 mm (1)
•  2.4 mm (2)
•  2.5 mm (5)
•  2.5 mm (1)
•  2.6 mm (2)
•  2.7 mm (1)
•  2.8 mm (1)
•  2.9 mm (1)
•  3.0 mm (3)
•  3.175 mm, 1/8" (35)
•  4.0 mm (39)
•  5.0 mm (13)
•  6,35 mm (1)
•  6.0 mm (42)
•  7,96 mm (1)
•  7.0 mm (1)
•  8.0 mm (38)
•  9 mm (1)
•  9,52 mm (3)
•  10.0 mm (19)
•  12 mm (7)
•  12,7 mm (5)
•  14 mm (2)
•  15 mm (3)
•  16 mm (8)
•  18 mm (9)
•  20.0 mm (9)
•  22 mm (16)
•  25 mm (10)
•  28 mm (1)
•  30 mm (10)
•  32 mm (2)
•  32 mm (1)
•  38 mm (5)
•  38,10 mm (1)
•  44,5 mm (1)
•  50,8 mm - 2" (1)
•  51 mm (5)
•  57 mm (1)

Shank Diameter

•  3.175 mm, 1/8" (34)
•  4.0 mm (17)
•  5 mm (5)
•  6.0 mm (40)
•  8.0 mm (28)
•  10.0 mm (8)
•  12,7mm (1/2") (2)
•  12.0 mm (2)

Coating

•  Blue (4)
•  DLC (Diamond-Like Carbon Coating) (5)
•  Titanium (6)

Angle

•  20 degree (1)
•  30 degree (1)
•  40 degree (1)
•  45 degree (1)
•  60 degree (5)
•  90 degree (4)
•  120 degree (3)
•  150 degree (2)

Tip

•  0,1 mm (1)