6 Axis 125kHz Mach3 USB CNC Motion Control Breakout Board NVCMV2.1
99,99 €
- Specification
- Products specification
- Support USB;
- 16 ports photoelectric isolated input interface
- 16 ports photoelectric isolated output interface
- 1 port 0-10V spindle speed analog output interface(can change to PWM output)
- can support 6 axis stepper systems maxisim,125KHz pulse output for every axis
- ARM motion control chip
- main device is 12V-32VDC power supply input,current should higher than 1A
- Products Appearance and size
- NVCM motion controller is with the sealed open structure, there are 4pcs setting holes at
- the bottom. We can fix 2pcs 3mm diameter holes at the cabinet, and install the controller into the cabinet.
- The products overall size is 150mm*84mm*20mm；
- The bottom install size is 125.5mm*71.5mm。
Kā noformēt pasūtījumu
Drošs maksājums
Piegāde
- Specification
- Products specification
- Support USB;
- 16 ports photoelectric isolated input interface
- 16 ports photoelectric isolated output interface
- 1 port 0-10V spindle speed analog output interface(can change to PWM output)
- can support 6 axis stepper systems maxisim,125KHz pulse output for every axis
- ARM motion control chip
- main device is 12V-32VDC power supply input,current should higher than 1A
- Products Appearance and size
- NVCM motion controller is with the sealed open structure, there are 4pcs setting holes at
- the bottom. We can fix 2pcs 3mm diameter holes at the cabinet, and install the controller into the cabinet.
- The products overall size is 150mm*84mm*20mm；
- The bottom install size is 125.5mm*71.5mm。
NVCMV2.1 USB MACH3 Controller 6 Axis
Datu lapa
- Savienojuma metode
- USB
- frekvence
- 125 kHz
- Asu skaits
- 6 asis
- Interfeiss
- MPG
Jums varētu arī patikt
44 produktu tajā pat kategorijā:
- Specification
- Products specification
- Support USB;
- 16 ports photoelectric isolated input interface
- 16 ports photoelectric isolated output interface
- 1 port 0-10V spindle speed analog output interface(can change to PWM output)
- can support 6 axis stepper systems maxisim,125KHz pulse output for every axis
- ARM motion control chip
- main device is 12V-32VDC power supply input,current should higher than 1A
- Products Appearance and size
- NVCM motion controller is with the sealed open structure, there are 4pcs setting holes at
- the bottom. We can fix 2pcs 3mm diameter holes at the cabinet, and install the controller into the cabinet.
- The products overall size is 150mm*84mm*20mm；
- The bottom install size is 125.5mm*71.5mm。