3 Axis Mach3 Controller TB6560 3.5A Stepper Motor Driver
search
  • 3 Axis Mach3 Controller TB6560 3.5A Stepper Motor Driver
  • 3 Axis Mach3 Controller TB6560 3.5A Stepper Motor Driver
  • 3 Axis Mach3 Controller TB6560 3.5A Stepper Motor Driver
  • 3 Axis Mach3 Controller TB6560 3.5A Stepper Motor Driver
  • 3 Axis Mach3 Controller TB6560 3.5A Stepper Motor Driver
  • 3 Axis Mach3 Controller TB6560 3.5A Stepper Motor Driver
  • 3 Axis Mach3 Controller TB6560 3.5A Stepper Motor Driver

3 Axis Mach3 Controller TB6560 3.5A Stepper Motor Driver

€89.99
  • With DCDC isalation in front and back of the optocoupler
  • High-speed optocoupler can through Max 40MHZ pluse in theory,not lose step ang not move deviation
  • 5V and resetting with tantalum capacitor filtering better than electrolytic capacitor
  • Spindle 10A relay
  • Limit port with wire connection,convenient to connect
  • Without freewheel diode
  • With switching power supply chip offer 5V 2A to board 
  • The advantages of the TB6560AHQ chip:
  • The vibration of the motor is small and low noise: because of the 2/8/16 resolution can satisfy the different speed.
  • Flush type low heat: The area of the chip can support itself to cool when the current is low
  • Supports a lot of stepper motors
  • The advantages in the high-speed running condition

Add DB25 LPT Cable Connector: Add LPT Cable Connector
Quantity
Out-of-Stock

 

How to order

 

Security policy

 

Delivery

  • With DCDC isalation in front and back of the optocoupler
  • High-speed optocoupler can through Max 40MHZ pluse in theory,not lose step ang not move deviation
  • 5V and resetting with tantalum capacitor filtering better than electrolytic capacitor
  • Spindle 10A relay
  • Limit port with wire connection,convenient to connect
  • Without freewheel diode
  • With switching power supply chip offer 5V 2A to board 
  • The advantages of the TB6560AHQ chip:
  • The vibration of the motor is small and low noise: because of the 2/8/16 resolution can satisfy the different speed.
  • Flush type low heat: The area of the chip can support itself to cool when the current is low
  • Supports a lot of stepper motors
  • The advantages in the high-speed running condition
  • Features:
  • PWM chopper type sinusoidal micro-order control technology;
  • segments: the 1,2,8,16 segments, DIP switch settings;
  • DC power supply up to 40V (peak);
  • maximum output drive current of 3.5A (peak), with an average output of 2.5A;
  • Standby automatic semi-flow functionality, reduce heat, reduce energy consumption;
  • Maximum Pulse Frequency 16KHZ;
  • interface uses high-speed opto-isolation;
  • attenuation fourth gear adjustable;
  • motor running smooth, low noise, no pulse input when the whistle;
  • compact form factor is easy to install;
  • pleasing in appearance, the cooling effect is good;
  • Dimensions: 153mm long * 132mm wide (pcb board size) Weight: 0.45kg
ST6560-T3 Mach3 Controller