New upgrade V5 NVEM 300KHz 3 Axis / 4 Axis / 5 Axis / 6 Axis Mach3 CNC Motion Control Breakout Board
129,99 €
Pasūtījuma nosūtīšana 3-24 stundu laikā
- Specification
- Products specification
- Support Ethernet;
- 16 ports photoelectric isolated input interface
- 16 ports photoelectric isolated output interface
- 1 port 0-10V spindle speed analog output interface(can change to PWM output)
- can support 6 axis stepper systems,300KHz pulse output for every axis
- ARM motion control chip
- main device is 12V-32VDC power supply input,current should higher than 1A
- Products Appearance and size
- NVEM New upgrade V5 motion controller is with the sealed open structure, there are 4pcs setting holes at
- the bottom. We can fix 2pcs 3mm diameter holes at the cabinet, and install the controller into the cabinet.
- The products overall size is 150mm*84mm*20mm；
- The bottom install size is 125.5mm*71.5mm。
Kā noformēt pasūtījumu
Drošs maksājums
Piegāde
- Specification
- Products specification
- Support Ethernet;
- 16 ports photoelectric isolated input interface
- 16 ports photoelectric isolated output interface
- 1 port 0-10V spindle speed analog output interface(can change to PWM output)
- can support 6 axis stepper systems,200KHz pulse output for every axis
- ARM motion control chip
- main device is 12V-32VDC power supply input,current should higher than 1A
- Products Appearance and size
- NVEM V2.1 motion controller is with the sealed open structure, there are 4pcs setting holes at
- the bottom. We can fix 2pcs 3mm diameter holes at the cabinet, and install the controller into the cabinet.
- The products overall size is 150mm*84mm*20mm；
- The bottom install size is 125.5mm*71.5mm。
V5 NVEM 300KHz Ethernet MACH3 Controller
Datu lapa
- Savienojuma metode
- Ethernet
- frekvence
- 300 kHz
- Outputs
- PWM output control of spindle
- Asu skaits
- 3 asis
4 asis
5 asis
6 asis - Interfeiss
- MPG
Klienti, kuri iegādājās šo preci nopirka arī:
44 produktu tajā pat kategorijā:
- Specification
- Products specification
- Support Ethernet;
- 16 ports photoelectric isolated input interface
- 16 ports photoelectric isolated output interface
- 1 port 0-10V spindle speed analog output interface(can change to PWM output)
- can support 6 axis stepper systems,300KHz pulse output for every axis
- ARM motion control chip
- main device is 12V-32VDC power supply input,current should higher than 1A
- Products Appearance and size
- NVEM New upgrade V5 motion controller is with the sealed open structure, there are 4pcs setting holes at
- the bottom. We can fix 2pcs 3mm diameter holes at the cabinet, and install the controller into the cabinet.
- The products overall size is 150mm*84mm*20mm；
- The bottom install size is 125.5mm*71.5mm。